Heat Shrink & Wire Crimp Kit

See Shipping Page*


Waterproof Heat Shrink & Wire Crimp Kit
3 wire kit for #10 - #14 AWG wire

Purpose: Create a waterproof connection for installation of submersible well pump or any other type of wire connection which must be waterproof.

Installation: 1. Slip shrink tube on each wire. 2. Crimp connector on each wire. 3. Center tubing over connector and heat from center outward. 4. Splice is complete when sealant flows from end of tube.

Application: 120 or 240 volt single phase 2-wire well pumps or any other 120 or 240 volt motor.

Installation instructions are included.